Basic Maintenance Tips For Two-Wheelers

It is not easy to own a bike. It takes a lot of work to care for and maintain it. Riding your bike on a regular basis puts a lot of wear and tear on the bike's parts. This is the primary reason why you should service your bike on a regular basis. This article will provide you with the top 5 simple bike maintenance and servicing tips.

Most Effective Maintenance Tips For Your Bike 

Even if you wash and clean your bike on a regular basis, you may not notice dust collecting in auto parts that you do not inspect on a regular basis. The constant wear and tear on your bike can reduce its performance efficiency.

Servicing your bike on a regular basis will keep you informed of its condition and will assist you in resolving problems as they arise. It is not difficult to service your motorcycle. The following are some pointers to help you service your bike without taking too much trouble -

• Oil And filter Replacement

Your bike's engine oil and filter should be changed on a regular basis. This is primarily due to the oil's function as a lubricant for the engine parts. It is possible for the oil to collect dust over time, reducing engine efficiency. The condition of your engine will improve if you change the oil and filter on a regular basis.

Must Check:- Two Wheeler Insurance Companies

• The Spark Plug

It is common for your bike's spark plugs to show signs of wear and tear. The gap between their electrodes is prone to becoming out of whack. With a feeler gauge, you can measure the spark plug gaps and adjust them by bending only the side electrode. Examine their firing ends for deposits. These build up over time as a result of the combustion process. If the plugs are corroded or extremely dirty, they must be replaced.

• Examine the Brake Pads

Your brake pads are extremely prone to wear and tear, especially when used for an extended period of time. This is primarily due to the amount of friction it is subjected to. As a result, it is critical to replace the brake pads on a regular basis in order to maintain an effective braking system. To indicate the maximum limit of damage, most pads have indicator grooves, lines, or cutouts. If you can't see it clearly, you must remove the pads from the calliper.

You may also like to read:- Benefits of Third-Party Bike Insurance  

• The Bike's Battery

Inspect and clean the bike's battery on a regular basis. If there is a leak in the cell, it should be replaced as soon as possible. If the bike isn't used frequently, keep the battery charged on a regular basis. As a result, the life of the bike will be extended.

• Assess the Engine Idle Speed

When the engine is fully warmed up, make sure it idles at the correct speed. Idle refers to the state of your engine when it is running without you touching the throttle grip. When you start your bike, your engine runs at idle speed. Idle speed is normally between 1000 and 1500 rpm. Idle speed can be adjusted using the adjuster knob on the side of the carburetors.

• Clutch

Maintain a loose clutch grip. If it's too tight, it means there's a problem with the bike. As a result, the grip must be properly adjusted. When the grip is too tight, more force is applied to the hold, potentially reducing the vehicle's mileage. Maintain clutch free play to prevent the clutch from being squeezed while driving the bike and causing damage to the bike.

Also Read:- What Is Personal Accident Cover In Bike Insurance?  

Take Away

The cost of maintaining the bike can be prohibitively expensive. If you want to avoid the costly bills that come with owning a bike, the best solution is to invest in bike insurance. This is required by the Indian Motor Vehicle Act and will assist you by providing financial assistance in times of need. As a result, make sure to get a bike insurance policy and ride safely.

Disclaimer: This article is issued in the general public interest and meant for general information purposes only. Readers are advised not to rely on the contents of the article as conclusive in nature and should research further or consult an expert in this regard.